2025 Honda Power Pumps WT20
- Year 2025
- Make Honda Power
- Model Pumps
- Engine GX160
2025 Honda Power Pumps WT20
2" trash pump
Features may include:
Heavy-duty 2" construction trash pump- Specially designed for job sites and applications where high volume trash water capacity is needed.
- The durable Honda GX series commercial grade engine is easy starting and provides ample power for the toughest conditions.
- Protects the pump, while offering a convenient tie down location for transport.
- The WT20 is designed for quick and easy service. An easy access service port makes clean-out quick.
- The volute is equipped with a replaceable stainless steel wear plate, which increases durability and reduces maintenance costs
- A convenient multi-tool is provided for easy removal and installation of the pump case, for tightening and removal of the priming plug and drain plug, and for tightening and removal of the hose coupling.
- The WB20 features abrasion-resistant silicone-carbide seals for extended wear.
- The rigid-mount cast iron volute reduces case wear, increasing the life of the pump.
- High performance mounts minimize vibration, keeping the pump from “walking" away or “burying" itself in soft soil conditions. The reduced vibration also reduces wear on components, increasing the pump's durability.
- The unique shape improves priming and higher discharge capacity. Wide vanes are designed to resist wear and maximize durability.
- Protects the pump by shutting the engine off when low oil is detected.
- The strainer allows up to 13/16 in. solids to pass through, as well as a large volume of water, helping to prevent clogging. Made of steel to withstand tough conditions.
Engine
Engine
GX160
Compression Ratio
9.0:1
Displacement
163 cc
Impeller
Conical Cast Iron | Mechanical Seal: Silicon Carbide
Bore
2.7"
Stroke
1.8"
Drivetrain
Drive System
Direct
Operational
Operating Conditions
Priming time: 60 sec. @ 16.4 ft.
Run Time Per Tankful
Max Discharge: 1.5 hr
Hydraulics
Pump Type
Trash Centrifugal Self-priming | Mechanical Seal: Silicon Carbide
Maximum Pressure
37 psi
Dimensions
Length
24.4"
Width
18.1"
Height
18.3"
Dimensions
Total head lift: 85 ft. | Suction head lift: 26 ft. | Suction port diameter: 2" NPT | Discharge port diameter: 2" NPT | Solids handling: 13/16 inch.
Capacities
Discharge Capacity
185 gal/min
Fuel Capacity
0.82 gal.
Weights
Dry Weight
104 lbs.
Features
Features
Volute: Rigid Mounted Cast Iron w/ Stainless Wear Plate | Strainer Part#: 78325-YG0-003
Warranty
Warranty
Residential: 24 months | Commercial: 12 months